A hollow cone spray pattern, similar to the BEX H series, but with wider spray angles. The included angle of the spray cone is 120° at 10 PSI. At low pressures hollow cone nozzles produce medium size, uniform droplets. At higher pressures finer droplets are produced.
The models listed are machined from bar stock and are one-piece construction. Male and female thread designs are available.
| Model # | Max. Free Passage (inches) | Capacities at Various Pressures (USGPM) | Spray Angle | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Female | Male | 3 psi | 5 psi | 7 psi | 10 psi | 15 psi | 20 psi | 30 psi | 40 psi | 60 psi | 80 psi | 100 psi | 10 psi | 20 psi | 40 psi | 80 psi | |
| 1/8FH1W | 1/8H1W | 0.055 | 0.055 | 0.071 | 0.084 | 0.100 | 0.123 | 0.141 | 0.173 | 0.200 | 0.245 | 0.283 | 0.32 | -- | 115° | 107° | 95° |
| 1/8FH2W | 1/8H2W | 0.077 | 0.110 | 0.141 | 0.167 | 0.200 | 0.245 | 0.283 | 0.35 | 0.40 | 0.49 | 0.57 | 0.63 | 120° | 117° | 105° | 97° |
| 1/8FH3W | 1/8H3W | 0.093 | 0.164 | 0.212 | 0.251 | 0.300 | 0.37 | 0.42 | 0.52 | 0.60 | 0.73 | 0.85 | 0.95 | 120° | 116° | 109° | 92° |
| 1/8FH5W | 1/8H5W | 0.109 | 0.274 | 0.35 | 0.42 | 0.50 | 0.61 | 0.71 | 0.87 | 1.00 | 1.22 | 1.41 | 1.58 | 120° | 116° | 107° | 90° |
| 1/4FH1W | 1/4H1W | 0.055 | 0.055 | 0.071 | 0.084 | 0.100 | 0.123 | 0.141 | 0.173 | 0.200 | 0.245 | 0.283 | 0.32 | 120° | 110° | 102° | 90° |
| 1/4FH2W | 1/4H2W | 0.077 | 0.110 | 0.141 | 0.167 | 0.200 | 0.245 | 0.283 | 0.35 | 0.40 | 0.49 | 0.57 | 0.63 | 120° | 110° | 105° | 92° |
| 1/4FH3W | 1/4H3W | 0.093 | 0.164 | 0.212 | 0.251 | 0.300 | 0.37 | 0.42 | 0.52 | 0.60 | 0.73 | 0.85 | 0.95 | 120° | 114° | 104° | 90° |
| 1/4FH5W | 1/4H5W | 0.109 | 0.274 | 0.35 | 0.42 | 0.50 | 0.61 | 0.71 | 0.87 | 1.00 | 1.22 | 1.41 | 1.58 | 120° | 113° | 107° | 98° |
| 1/4FH7.5W | 1/4H7.5W | 0.158 | 0.41 | 0.53 | 0.63 | 0.75 | 0.92 | 1.06 | 1.30 | 1.50 | 1.84 | 2.12 | 2.37 | 120° | 115° | 110° | 92° |
| 1/4FH10W | 1/4H10W | 0.170 | 0.55 | 0.71 | 0.84 | 1.00 | 1.22 | 1.41 | 1.73 | 2.00 | 2.45 | 2.83 | 3.2 | 120° | 115° | 110° | 93° |
| 1/4FH12.5 | 1/4H12.5W | 0.188 | 0.68 | 0.88 | 1.05 | 1.25 | 1.53 | 1.77 | 2.17 | 2.50 | 3.06 | 3.5 | 4.0 | 120° | 118° | 110° | 94° |
| 1/4FH15W | 1/4H15W | 0.201 | 0.82 | 1.06 | 1.26 | 1.50 | 1.84 | 2.12 | 2.60 | 3.00 | 3.7 | 4.2 | 4.7 | 120° | 115° | 108° | 92° |
| 3/8FH5W | 3/8H5W | 0.109 | 0.274 | 0.35 | 0.42 | 0.50 | 0.61 | 0.71 | 0.87 | 1.00 | 1.22 | 1.41 | 1.58 | 120° | 117° | 107° | 99° |
| 3/8FH7.5W | 3/8H7.5W | 0.158 | 0.41 | 0.53 | 0.63 | 0.75 | 0.92 | 1.06 | 1.30 | 1.50 | 1.84 | 2.12 | 2.37 | 120° | 113° | 110° | 93° |
| 3/8FH10W | 3/8H10W | 0.170 | 0.55 | 0.71 | 0.84 | 1.00 | 1.22 | 1.41 | 1.73 | 2.00 | 2.45 | 2.83 | 3.2 | 120° | 115° | 110° | 93° |
| 3/8FH12.5W | 3/8H12.5W | 0.188 | 0.68 | 0.88 | 1.05 | 1.25 | 1.53 | 1.77 | 2.17 | 2.50 | 3.06 | 3.5 | 4.0 | 120° | 115° | 108° | 94° |
| 3/8FH15W | 3/8H15W | 0.201 | 0.82 | 1.06 | 1.26 | 1.50 | 1.84 | 2.12 | 2.60 | 3.00 | 3.7 | 4.2 | 4.7 | 120° | 115° | 108° | 92° |
| 3/8FH20W | 3/8H20W | 0.234 | 1.10 | 1.41 | 1.67 | 2.00 | 2.45 | 2.83 | 3.5 | 4.0 | 4.9 | 5.7 | 6.3 | 120° | 118° | 116° | 110° |
| 3/8FH25 | 3/8H25W | 0.265 | 1.37 | 1.77 | 2.09 | 2.50 | 3.06 | 3.5 | 4.3 | 5.0 | 6.1 | 7.1 | 7.9 | 120° | 117° | 115° | 110° |
| 3/8FH30W | 3/8H30W | 0.280 | 1.64 | 2.12 | 2.51 | 3.00 | 3.7 | 4.2 | 5.2 | 6.0 | 7.3 | 8.5 | 9.5 | 120° | 115° | 110° | 102° |
| 1/2FH50W | 1/2H50W | 0.358 | 2.74 | 3.5 | 4.2 | 5.0 | 6.1 | 7.1 | 8.7 | 10.0 | 12.2 | 14.1 | 15.8 | 120° | 115° | 108° | 103° |
| 3/4FH80W | 3/4H80W | 0.468 | 4.4 | 5.7 | 6.7 | 8.0 | 9.8 | 11.3 | 13.9 | 16.0 | 19.6 | 22.6 | 25.3 | 120° | 117° | 110° | 103° |
