This is a nozzle tip only. A Z-body is required to complete the assembly
Full cone spray pattern, with uniform distribution throughout the approximately square cone.
These nozzles are injection molded and contain a patented insert with larger flow passages than older styles, and are less susceptible to clogging.
The ZIP-TIP nozzles feature a design that does not require any tools for installation or removal, thanks to a "light-lock" feature that allows for easy removal. The seals on these nozzles are located on and removed with the nozzle tip, which makes it easy to flush the nozzles.
| Model # | Max. Free Passage (inches) | Capacities at Various Pressures (USGPM) | Spray Angle | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 psi | 7 psi | 10 psi | 15 psi | 20 psi | 30 psi | 40 psi | 60 psi | 80 psi | 100 psi | 150 psi | 7 psi | 20 psi | 80 psi | ||
| ZS3.6SQ | 0.057 | 0.255 | 0.301 | 0.36 | 0.44 | 0.51 | 0.62 | 0.72 | 0.88 | 1.02 | 1.14 | 1.39 | 42° | 55° | 50° |
| ZS4.8SQ | 0.064 | 0.34 | 0.40 | 0.48 | 0.59 | 0.68 | 0.83 | 0.96 | 1.18 | 1.36 | 1.52 | 1.86 | 50° | 65° | 60° |
| ZS6SQ | 0.081 | 0.42 | 0.50 | 0.60 | 0.73 | 0.85 | 1.04 | 1.20 | 1.47 | 1.70 | 1.90 | 2.32 | 30° | 65° | 60° |
| ZS10SQ | 0.091 | 0.71 | 0.84 | 1.00 | 1.22 | 1.41 | 1.73 | 2.00 | 2.45 | 2.83 | 3.2 | 3.9 | 61° | 67° | 60° |
| ZS12SQ | 0.091 | 0.85 | 1.00 | 1.20 | 1.47 | 1.70 | 2.08 | 2.40 | 2.94 | 3.4 | 3.8 | 4.6 | 71° | 76° | 69° |
| ZS14SQ | 0.091 | 0.99 | 1.17 | 1.40 | 1.71 | 1.98 | 2.42 | 2.80 | 3.4 | 4.0 | 4.4 | 5.4 | 78° | 85° | 75° |
| ZS18SQ | 0.091 | 1.27 | 1.51 | 1.80 | 2.20 | 2.55 | 3.12 | 3.6 | 4.4 | 5.1 | 5.7 | 7.0 | 85° | 88° | 76° |
