1/8F0003 Flat Spray Injection Molded F-Nozzles

Dimensions

⅛F0003

SPRAY CHARACTERISTICS

The F00 series spray nozzle produces a high impact solid stream for situations where maximum impact is required over a very small target area.

CONSTRUCTION

Each BEX molded nozzle is designed with a series of “knobs” which makes them easierto finger tighten than a hex, especially when wet. The design feature of a small starter barrel greatly reduces the tendency to strip or cross-thread the nozzle during the installation.

TYPICAL APPLICATIONS

STANDARD MATERIALS

POLYPROPYLENE (LL) - (Green) excellent chemical and corrosion resistance. Useful up to 175°F.
NATURAL POLYPROPYLENE (LN) - non-pigmented for optimum purity.
PVDF (KK) - (Red) excellent durability and abrasion resistance and is inert to most chemicals. Useful up to 300°F.
NATURAL PVDF (KN) - non-pigmented for optimum purity.

Download Full Specs Watch Video

Capacity Table

Model Number	Orifice Diameter (inches)	Capacities at Various Pressures (USGPM)
Model Number	Orifice Diameter (inches)	5 psi	7 psi	10 psi	20 psi	30 psi	40 psi	60 psi	80 psi	100 psi	200 psi	300 psi	400 psi	500 psi
1/8F0002	0.034	0.269	0.084	0.100	0.141	0.173	0.200	0.245	0.283	0.32	0.45	0.55	0.63	0.71
1/4F0002	0.034	0.071	0.084	0.100	0.141	0.173	0.200	0.245	0.283	0.32	0.45	0.55	0.63	0.71
1/8F00025	0.038	0.088	0.105	0.125	0.177	0.217	0.250	0.306	0.35	0.40	0.56	0.68	0.79	0.88
1/8F0003	0.042	0.106	0.126	0.150	0.212	0.260	0.300	0.37	0.42	0.47	0.67	0.82	0.95	1.06
1/4F0003	0.042	0.106	0.126	0.150	0.212	0.260	0.300	0.37	0.42	0.47	0.67	0.82	0.95	1.06
1/8F0004	0.048	0.141	0.167	0.200	0.283	0.35	0.40	0.49	0.57	0.63	0.89	1.10	1.26	1.41
1/4F0004	0.048	0.141	0.167	0.200	0.283	0.35	0.40	0.49	0.57	0.63	0.89	1.10	1.26	1.41
1/8F0005	0.054	0.177	0.209	0.250	0.35	0.43	0.50	0.61	0.71	0.79	1.12	1.37	1.58	1.77
1/4F0005	0.054	0.177	0.209	0.250	0.35	0.43	0.50	0.61	0.71	0.79	1.12	1.37	1.58	1.77
1/8F0006	0.059	0.212	0.251	0.300	0.42	0.52	0.60	0.73	0.85	0.95	1.34	1.64	1.90	2.12
1/4F0006	0.059	0.212	0.251	0.300	0.42	0.52	0.60	0.73	0.85	0.95	1.34	1.64	1.90	2.12
1/4F0008	0.068	0.283	0.33	0.40	0.57	0.69	0.80	0.98	1.13	1.26	1.79	2.19	2.53	2.83
1/8F0010	0.076	0.35	0.42	0.50	0.71	0.87	1.00	1.22	1.41	1.58	2.24	2.74	3.2	3.5
1/4F0010	0.076	0.35	0.42	0.50	0.71	0.87	1.00	1.22	1.41	1.58	2.24	2.74	3.2	3.5
3/8F0010	0.076	0.35	0.42	0.50	0.71	0.87	1.00	1.22	1.41	1.58	2.24	2.74	3.2	3.5
1/4F0015	0.094	0.53	0.63	0.75	1.06	1.30	1.50	1.84	2.12	2.37	3.4	4.1	4.7	5.3
3/8F0015	0.094	0.53	0.63	0.75	1.06	1.30	1.50	1.84	2.12	2.37	3.4	4.1	4.7	5.3
1/4F0020	0.108	0.71	0.84	1.00	1.41	1.73	2.00	2.45	2.83	3.2	4.5	5.5	6.3	7.1
3/8F0020	0.011	0.71	0.84	1.00	1.41	1.73	2.00	2.45	2.83	3.2	4.5	5.5	6.3	7.1
1/4F0030	0.133	1.06	1.26	1.50	2.12	2.60	3.00	3.7	4.2	4.7	6.7	8.2	9.5	10.6
3/8F0030	0.133	1.06	1.26	1.50	2.12	2.60	3.00	3.7	4.2	4.7	6.7	8.2	9.5	10.6
1/4F0040	0.153	1.41	1.67	2.00	2.83	3.5	4.0	4.9	5.7	6.3	8.9	11.0	12.6	14.1
3/8F0040	0.153	1.41	1.67	2.00	2.83	3.5	4.0	4.9	5.7	6.3	8.9	11.0	12.6	14.1
1/4F0050	0.171	1.77	2.09	2.50	3.5	4.3	5.0	6.1	7.1	7.9	11.2	13.7	15.8	17.7
3/8F0050	0.171	1.77	2.09	2.50	3.5	4.3	5.0	6.1	7.1	7.9	11.2	13.7	15.8	17.7
1/4F0060	0.187	2.12	2.51	3.00	4.2	5.2	6.0	7.3	8.5	9.5	13.4	16.4	19.0	21.2
3/8F0060	0.187	2.12	2.51	3.00	4.2	5.2	6.0	7.3	8.5	9.5	13.4	16.4	19.0	21.2
1/4F0070	0.202	2.47	2.93	3.5	4.9	6.1	7.0	8.6	9.9	11.1	15.7	19.2	22.1	24.7
3/8F0070	0.202	2.47	2.93	3.5	4.9	6.1	7.0	8.6	9.9	11.1	15.7	19.2	22.1	24.7