1/4F6510 Flat Spray Injection Molded F-Nozzles

Dimensions

¼F6510

SPRAY CHARACTERISTICS

The F65 spray nozzles produce a flat, fan-shaped spray pattern with a spray angle of 65° at 40 PSI. The spray density tapers off towards the edges of the pattern to allow for overlapping while maintaining uniform spray density. These nozzles are suitable for various washing and spraying applications.

CONSTRUCTION

Each BEX molded nozzle is designed with a series of “knobs” which makes them easierto finger tighten than a hex, especially when wet. The design feature of a small starter barrel greatly reduces the tendency to strip or cross-thread the nozzle during the installation.

TYPICAL APPLICATIONS

STANDARD MATERIALS

POLYPROPYLENE (LL) - (Green) excellent chemical and corrosion resistance. Useful up to 175°F.
NATURAL POLYPROPYLENE (LN) - non-pigmented for optimum purity.
PVDF (KK) - (Red) excellent durability and abrasion resistance and is inert to most chemicals. Useful up to 300°F.
NATURAL PVDF (KN) - non-pigmented for optimum purity.

Download Full Specs Watch Video

Capacity Table

Model Number	Equivalent Orifice Diameter (inches)	Capacities at Various Pressures (USGPM)													Spray Angles
Model Number	Equivalent Orifice Diameter (inches)	5 psi	7 psi	10 psi	15 psi	20 psi	30 psi	40 psi	50 psi	60 psi	80 psi	100 psi	150 psi	300 psi	20 psi	40 psi	80 psi
1/8F6502	0.034	0.269	0.084	0.100	0.123	0.141	0.173	0.200	0.224	0.245	0.283	0.32	0.39	0.55	38°	65°	77°
1/4F6502	0.034	0.071	0.084	0.100	0.123	0.141	0.173	0.200	0.224	0.245	0.283	0.32	0.39	0.55	38°	65°	77°
1/8F65025	0.038	0.088	0.105	0.125	0.153	0.177	0.217	0.250	0.280	0.306	0.35	0.40	0.48	0.68	38°	65°	77°
1/8F6503	0.042	0.106	0.126	0.150	0.184	0.212	0.260	0.300	0.34	0.37	0.42	0.47	0.58	0.82	64°	65°	76°
1/4F6503	0.042	0.106	0.126	0.150	0.184	0.212	0.260	0.300	0.34	0.37	0.42	0.47	0.58	0.82	64°	65°	76°
1/8F6504	0.048	0.141	0.167	0.200	0.245	0.283	0.35	0.40	0.45	0.49	0.57	0.63	0.77	1.10	44°	65°	74°
1/4F6504	0.048	0.141	0.167	0.200	0.245	0.283	0.35	0.40	0.45	0.49	0.57	0.63	0.77	1.10	44°	65°	74°
1/8F6505	0.054	0.177	0.209	0.250	0.306	0.35	0.43	0.50	0.56	0.61	0.71	0.79	0.97	1.37	53°	65°	72°
1/4F6505	0.054	0.177	0.209	0.250	0.306	0.35	0.43	0.50	0.56	0.61	0.71	0.79	0.97	1.37	53°	65°	72°
1/8F6506	0.059	0.212	0.251	0.300	0.37	0.42	0.52	0.60	0.67	0.73	0.85	0.95	1.16	1.64	54°	65°	72°
1/4F6506	0.059	0.212	0.251	0.300	0.37	0.42	0.52	0.60	0.67	0.73	0.85	0.95	1.16	1.64	54°	65°	72°
1/4F6508	0.068	0.283	0.33	0.40	0.49	0.57	0.69	0.80	0.89	0.98	1.13	1.26	1.55	2.19	55°	65°	71°
1/4F6510	0.076	0.35	0.42	0.50	0.61	0.71	0.87	1.00	1.12	1.22	1.41	1.58	1.94	2.74	57°	65°	73°
3/8F6510	0.076	0.35	0.42	0.50	0.61	0.71	0.87	1.00	1.12	1.22	1.41	1.58	1.94	2.74	57°	65°	73°
1/4F6515	0.094	0.53	0.63	0.75	0.92	1.06	1.30	1.50	1.68	1.84	2.12	2.37	2.90	4.1	59°	65°	71°
3/8F6515	0.097	0.53	0.63	0.75	0.92	1.06	1.30	1.50	1.68	1.84	2.12	2.37	2.90	4.1	60°	65°	72°
1/4F6520	0.108	0.71	0.84	1.00	1.22	1.41	1.73	2.00	2.24	2.45	2.83	3.2	3.9	5.5	59°	65°	72°
3/8F6520	0.108	0.71	0.84	1.00	1.22	1.41	1.73	2.00	2.24	2.45	2.83	3.2	3.9	5.5	60°	65°	72°
1/4F6530	0.133	1.06	1.26	1.50	1.84	2.12	2.60	3.00	3.4	3.7	4.2	4.7	5.8	8.2	61°	65°	72°
3/8F6530	0.133	1.06	1.26	1.50	1.84	2.12	2.60	3.00	3.4	3.7	4.2	4.7	5.8	8.2	61°	65°	72°
1/4F6540	0.153	1.41	1.67	2.00	2.45	2.83	3.5	4.0	4.5	4.9	5.7	6.3	7.7	11.0	62°	65°	72°
3/8F6540	0.153	1.41	1.67	2.00	2.45	2.83	3.5	4.0	4.5	4.9	5.7	6.3	7.7	11.0	62°	65°	74°
1/4F6550	0.171	1.77	2.09	2.50	3.06	3.5	4.3	5.0	5.6	6.1	7.1	7.9	9.7	13.7	63°	65°	73°
3/8F6550	0.171	1.77	2.09	2.50	3.06	3.5	4.3	5.0	5.6	6.1	7.1	7.9	9.7	13.7	63°	65°	73°
1/4F6560	0.188	2.12	2.51	3.00	3.7	4.2	5.2	6.0	6.7	7.3	8.5	9.5	11.6	16.4	63°	65°	73°
3/8F6560	0.187	2.12	2.51	3.00	3.7	4.2	5.2	6.0	6.7	7.3	8.5	9.5	11.6	16.4	63°	65°	65°
3/8F6570	0.202	2.47	2.93	3.5	4.3	4.9	6.1	7.0	7.8	8.6	9.9	11.1	13.6	19.2	63°	65°	74°